Drivers for Low Pressure UV lamps
Nedap offers intelligent multiple lamp solutions for low pressure UV lamps that combines high efficiency power conversion with intelligent controls and pre-programmed lamp characteristic settings for optimal lamp life, also for HO- and Amalgam lamps. Nedap technology is used in the newest and largest UV drinking water purification plant for New York City. Each day this plant will supply 8.3 billion liters of clean water to the more than 9 million inhabitants of New York. In this plant all 12,000 lamps are powered by Nedap.
Lamp Driver for 2 x 240W
Features
- High efficiency
- High reliability
- Long lamp life
- Multiple outputs (2 lamps)
- Low inrush current
- Constant lamp power control
- Dimming down to 60%
- Lamp end of life protection
- Remote on/off and dimming (PWM)
- Long lamp wiring lenght allowed (up to 25m)
Lamp Driver UniMulti 90 - 440W
Features
- High efficiency
- High reliability
- Programmed start possibility
- Instant start possibility
- Multiple outputs (4 or 2 lamps)
- Wide range of pre-programmed lamp types
- Low inrush current
- LED status indication (status / alarms)
- Constant lamp power or lamp current control
- Lamp end of life protection
- Data logging
- Serial communication (MODBUS)
- Remote on / off and dimming (1 - 10V or PWM)
- Long lamp wiring length allowed (up to 13 or 25 m*)
- Easy daisy chain RJ45 control wiring
Lamp Driver 800W
Features
- Small size / low weight
- Autorange input
- 0 - 10V control of output power
- Power Factor Correction included
- Long lamp cable length (up to 30m)
- High efficiency
- Low inrush current
- 4x LED status indication
- Opto-isolated control outputs
- Lamp on
- System status
- Lamp driver status
- Lamp status
- Serial communication (MODBUS)
- Without Modbus communication: settings are fixed
Lamp Driver Full Rack 2x 1000W
Features
- Allows very small footprint cabinets
- Continuous GND fault
- Dimming with additional filament heating
- Active Power Factor circuit included
- High efficiency
- Status indication LED’s
- Low inrush current
- Long lamp cable lenght (up to 30m, see manual)
- Serial communication (Modbus)
- Preprogammed lamp parameters for optimal lamp life
- Lamp End of Life (EOL) protection
- Available in Y and Delta